Having a pond gives you beautiful feelings. Leaky ponds are common in all over the world. A pond has one issue to be leaked sometimes otherwise no one want to remove it after making it. Pond owners often use search the simple way to reduce water seepage. Ponds sealing in this regard ponds bottom particularly must be cared with proper take care of lining. There were different ways to control the water seepage in past if the pond bottom is very dry, hard it means it is open to being cracked. Any extreme hot or cold weather can make it leak and has open cracked. Some caution is for pond owners
- Avoiding working inside the pond over the soiled blanket when the pond is drained or fish are being harvested
- Not let the soiled blanket dry
- Refilling the pond soon
- Water can be added and, if the pond continues to lose water
- Look for another crack.
- Concrete Pond Ponds are often filled with organic growth. For them; the only solution is concrete pond sealer.
Gluing is one way of sealing ponds which does not cost anything. Cover the bottom and sides with a thick layer of fresh manure. Cover the manure with a layer of fresh grass cuttings or finely chopped leaves.
Clay lining is another ‘traditional’ method of waterproofing but not long lasting. The 5-6cm thick clay layer should be being kept wet all the time. Water will be in the center as more clay is added; the center of the pond must be kept filled with water.
If the clay is allowed to dry it will crack and leak. Almost all ponds will leak to some degree you must not be surprised if any new pond starts leaking. You must determine pond’s leakage rate by measuring the water level drop with a marked stick. Be care full when weather changes, especially cold or very humid, calm weather. For long-term pond sealing pond leak sealer is the good choice without any side effect. For this, you have to make your water feature free from water. Clean it with the broom and wash it with any detergent. Fish must be kept at a safe place during the washing or completing Pond sealing method. Now mix the product with the driller. Don’t let it keep more than four hours as after that it may lose its effectiveness. Apply the smooth coat on the surface of the pond by you or ask some expert. Its application is easy to install. Now let it dry and wait for some days then refill it with water and utilize it again.
This Pond sealing method will prolong for ten years. Any extreme of temperature won’t is able to crack it. No fear of peeling off or fraying at all. If you will talk about its cost it’s affordable for everyone and guard to your pond at one-time spending. It enhances the looks of your pond and eco-friendly for water life. It has all qualities to be brought immediately.